Special offer AUTO 6% OFF Yanhua ACDP 2 BWM Package with Module 1/2/3/4/7/8/11+ License for BWM Key Programming Cluster Correction with Free Gifts pk CGDI BWM/Xhorse VVDI2

Yanhua Mini ACDP-2 Programming Master BWM Full Package with Module1/2/3/4/7/8/11 Total 7 Authorizations Added B48/N20/N55/B38 Bench Board

Buy ACDP 2 BWM Package Get Following Free Gifts:

Free ACDP-2 B48/B58 bench interface board(SK337-B)
Free ACDP-2 N20/N13 Bench Interface Board(SK329-B)
Free ACDP-2 N55 Bench Interface Board(SK336-B)
Free ACDP-2 B38 bench interface board(SK339-B)

ACDP BWM Package Includes the Following Modules

Package Features:

1. ACDP-2 Basic Module with License A801
Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), 
and parts of Freescale / NEC MCU in circuit programming (ICP). This module is a necessary basic configuration for other modules.

2. CAS Module (Module1) with License A500
Support BWM CAS1 – CAS3/CAS4+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.

3. FEM/BDC Module (Module2) with License A50A A50C
Support BWM FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.

4. ACDP-2 ISN Module (Module3) with License A50B A50D A50E
Read/write BWMN20/N55/N13 ISN code via OBD.
Read/write BWM MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.

Newly Add models(They do not come with the package by default, optional):
BWM N13/N20/N63/S63/N55/B38 ISN read/write and ecu clone via bench mode
BWM B48/B58 ISN Reading and Clone via Bench Mode
BWM B37/B47/N47/N57 Diesel Engine Computer ISN Read/Write and Clone
BWM N12/N14/N45/N46 DME ISN Read/Write and Clone
BWM N47/N57 Diesel DME ISN Read/Write and Clone

5. Read and write BWM M35080, 35160DO WT etc EEPROM (Module4) with License A802
Read and write BWM M35080, 35160DO WT etc EEPROM, erase 080DOWQ, 080DOWT, 160DOWQ, 160DOWT, M35128 models.

6. Refresh BWM Keys (Module7) with License A521
Refresh BWME chassis/F chassis key to make BWM keys can be used repeatedly.

7. ACDP-2 BWM FRM Footwell Module (Module8)
Read and write BWMFRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
The advantage of BWM FRM of ACDP: Integrated data reading/writing, data conversion in one programmer; no need to write other cars'data; no need to coding. Simple and efficient.

8. Module 11  BWM gearbox EGS ISN clearance with License A51A
BWM 6HP/8HP gearbox EGS ISN clearance
Support BWM E Chassis 8HP ISN Clear now, if you need, you can pay for the A51D License for BWM E Chassis 8HP ISN Clear
Support BWM E Chassis 6HP ISN Clear now, if you need, yo can buy A50F License for BWM E Series 6HP(GS19D) Gearbox/Transmission TCM EGS ISN Refresh

Yanhua Mini ACDP BWM Menu Display:










Yanhua Mini ACDP Highlights:
Test car NO longer needs engines
YANHUA car keys programming NO longer need soldering iron
Car locksmith NO longer needs soldering work.
The first in the world
Programming no need soldering

Yanhua Mini ACDP IMMO/Mileage Programming
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin

Module1 BWM CAS1-CAS3+Key Programming via OBD
Read CAS EEPROM
Add Keys
Reset Mileage
Back up or recover CAS
All keys Lost

Module1 BWM CAS4/CAS4+
Read CAS4 EEPROM without soldering/welding
Add Keys without soldering/welding
Reset Mileage without soldering/welding
Back up or recover CAS without soldering/welding
All keys Lost without soldering/welding

Module2 BWM FEM/BDC
All keys lost without soldering/welding
Add keys without soldering/welding
Delete Keys without soldering/welding
Enable/Disable keys without soldering/welding
Read Key ID
Repair/Replace FEM Module without soldering/welding
Reset Mileage without soldering/welding

ACDP-2 Module3 Read and Write ISN Code
N20(mevd1724, mevd172P, mevd1729), N13(mevd1725, ), N55(mevd172, mevd1726, mevd172G, mevd172S, MEVD17, ), MSV80, MSD81, MSD85, MSD85HY, MSD87, MSV90, MEVD1728(s63), mev1722, med172, mevd1727, dde701_edc17c50, BMSX….

Module4 BWM35080, 35160DO WT Read & Write
Read and write BWMM35080, 35160DO WT etc EEPROM

Module7 Refresh BWM Keys Module
Refresh BWM E chassis/F chassis key to make BWM keys can be used repeatedly.
Please refer to our official blog: How to use Yanhua Mini ACDP refreshBWM keys

ACDP-2 Module 8 BWM FRM FRM Footwell Module 
Read and write BWM FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
Please refer to our official blog: How to use Yanhua Mini ACDP do BWMFRM programming

Module 11  BWMgearbox EGS ISN clearance
BWM 6HP/8HP gearbox EGS ISN clearance

Yanhua MINI ACDP BWM VS CGDI BWM VS Xhorse VVDI2 BBWM:
 

Clumn Name	Mini ACDP BWMFull	CGDI BWM	Xhorse VVDI2 BWM
Picture
BWM CAS1-CAS3 Key Programming	Yes	Yes	Yes
BWM CAS4-CAS4+ Key Programming	Yes, No need Soldering	Yes, need Soldering	Yes, need Soldering
BWM FEM/EDC Key Programming	Yes, No need Soldering	Yes, need Soldering	Yes, need Soldering
BWM DME ISN Code Read & Write	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
BWM 35080 35160DO WT EEPROM Read & Write	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
Refresh BWM Keys	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
Free FRM Programming	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
BWM CAS Mileage	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, but need to work with other device

Yanhua mini ACDP BWM Review:

1. nice tool again. this stray with all the activations is also worth more (BWM CAS1, CAS2, CAS3, CAS3 +, CAS4, CAS4 +, FEM, BDC 8pin IC chip read and write ..)

2.currently i’m only doing BWM with cas 1-3 and ews my lonsdor can do cas 1-3 it will only add keys to 3+ and up. I just don’t like to solder so I figured this tool would simplify things a bit and make it faster

3. I got it since a week and i am excited
    M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and its better to desolder)
    Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps)
    Tried several CAS4 to read with out any problems, Mileage reset works too
    CAS3 tested only 1 but read without problem
    On a nother group they reported to create successfully keys on FEM/BDC and CAS4

4. I just get it.
    Reading eeprom cas4 and make a key for f11 so far done.
    Cant say much more.
    cas4 reading eprom compared with vvdi reading and its matching 100%

5. All 35080/160 are possible, like all other programmer can do also.
    ACDP is also working with smartphone tethering so a router is not a must.
    Didn’t test if it works offline,
    Fem key making and mileage reset is confirmed by other users in WhatsApp group,
    I can confirm mileage reset cas3/3+/4, key making cas3/3+, key 868mhz refresh
    and frm programming
    But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer
    until you have figured out how to place probes correctly

6.  I have it and have had it for more than 3 months now.
    It works perfect on all CAS types and for AKL but for FEM and BDC it still has a long way to go.
    Its also compitable via bluetooth so not only wifi is needed.
    Its a great and small tool, easy to use, compared to VVDI, R70, Upa and etc.

7.  for FEM/BDC with isn or key make, you have to use module 2. For 35160/35080 BWM dashboard mileage correction, you need to get module 4.

8. Tested the Mini ACDP here with 4 CAS3 and one CAS4+ without any problems. For the first CAS3 I needed more than 5 minutes to place the pins correctly but after some experiences I needed only 30 seconds for everything. Important is that you use the small screw tools to clean the contacts.
 For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.

9. something good to share: For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won’t need the electric bridges any more, and it is easy to use.

10. I got Yanhua mini. Interesting tool. I can connect to CAS real easy. Reads ok. So far

*1. Read F10 N55 ISN OBD - OK
*2. Make key Cas 2 by dump - OK
*3. Made key CAS3+all keys lost - Not working forst time, I am trying it again today just to be sure
*4. Read FRM - OK
*5. Renew random used key - Nok but resetting key I just made with the tool works 100%, interesting
*6. Check key frequency - nok, It shows key frequency when making key but there is a fubction for checking random key frequency. Cant get that to work yet
Not tested CAS 4 or FEM yet though I think it may be strong in that condidering it read F10 ISN via OBD

Support do respond to queries. They are handling my issues in 3 and 5 above. More testing to come. I like the fact that it receives free updates. That should mean issues will get resolved as we go along (not sure is CAS3 will be given that much attention). I love the idea of not soldering if only to save my poor vision

11.Today I received this tool and do some testing. 

reset used key 868mhz e series- successful reset
cas4- reset milage to 0 - successful 
cas4- read eeprom and flash BUT EVERY TIME DIFFERENT DATA(the read out file, named with date ).
i will post readed files someone can check if is ok
Frm3 xeq384 - can read and write d flash, and that is all. CAN NOT write eeprom 


FAQ:

Q: Will acdp BWM support 2019 all BWM function?
A: It support f chassis, do not support G chassis(2019 BWM 5 series and 7 series is G chassis)

Q: With your ACDP, I need remove ST95256 from FEM?
A: No need remove ST95256, no need weld with ACDP

Q: If ACDP can change VIN for BWM?
A: Yes, it can change VIN for BWM: you need read out CAS data, then use ICP repair it, change VIN, save new data, finally reverse the CAS module

Q: Does ACDP BWM support 2015 BWM 528li cas4+ add keys via obd?
A: No, CAS4/CAS4+ do not support obd mode