GODIAG GT101 PIRT Power Probe is a multi-use circuit-tester with built-in diagnostic power. It is the best electrical tester for reducing diagnostic time in all 6- to 40-volt vehicle electrical systems. Undoubtedly it is the most versatile and practical tool ever for its users.
Vident iBT200 is used for lead-acid starting battery, testing the following conditions of the battery, cranking system and charging system. This tester supplies readings by a high resolution LCD display with great design of easy-to-use buttons operation, intelligent test methods and reverse polarity protection. It makes operation safe, clear and convenient. So this is the best tool in the fields of battery sales, vehicle repair and battery inspection in equipment system associated with lead-acid starting battery.
Perfect Match with OTOFIX D1 & D1 Lite
Adaptive Conductance Algorithm for Both in-Verhicle And Out-of-Vehicle Tests
Diagnostics for The Electrical Systems
GODIAG GT103 Mini Pirt Electric Circuit Tester is a multi-use circuit-tester with the diagnostic power from the car battery or the external battery. It is the best electrical tester for reducing diagnostic time in all 6-30 volt vehicle electrical systems.This tool simplifies the testing of fuse boxes, verifies the correct operation of motors, lights, relays, sensors, wires, and communication-circuits. Thus GT103 is the most versatile and practical tool ever for its users.
GODIAG GT102 PIRT Power Probe is a multi-use circuit-tester with built-in diagnostic power. It is the best electrical tester for reducing diagnostic time in all 6- to 40-volt vehicle electrical systems. Undoubtedly it is the most versatile and practical tool ever for its users.This tool simplifies the testing of fuse boxes, verifies the correct operation of motors, lights, relays, sensors, wires, and communication-circuits. The large LCD color display makes for easy viewing in direct sunlight or complete darkness.
This KZYEE KS10 test pen applies to detection of the DOT4 brake fluid performance,indicating the brake fluid condition through five LED lights, using the AC pulse testing method,greatly to reduce the polarization phenomenon during the brake fluid testing, the test result is accurate and the measuring speed is fast.
AUTOOL CT150 Automotive Motorcycle Injection Tester and Cleaner,very easy to use and operate.
All-Sun EM287 This unit is the best electrical tester for reducing diagnostic time in automotive electrical systems. After a simple hook-up of the unit to the vehicle‘s battery, automotive technician can conduct a positive or negative battery current to the tip by rocking the rock switch forward or backward. The unit can be used to measure dc voltage and test for continuity or for bad ground contacts. It can also be used to follow and locate short circuits. It is short-circuit protected. And its long cable allows you to perform test easily. Powered by the vehicle battery directly.
Automotive Circuit Tester ADD200
Check battery state on phone APP via Bluetooth 4.0 when device is installed
Multifunction Automotive Circuit Test Lead Kit contain most of male and female terminals for connecting cars electronic system and your testing tools, It is easily connect car and test equipment through these sets of leads. With this set leads can save your time and make your job much convenient. Its an indispensable test aid for car diagnostics.
new adapter for CGPRO 9S12
support 35160WT odometer reset
AT60 is a self-developed TPMS tool which can read data from most original and third-party sensors. It can also upgrade the Pro-Sensor wirelessly, and the upgraded sensor can replace the original sensor. The product is simple in operation and friendly in interface, and includes the TPMS Re-learning Operation Guide. It is widely used in garages and tire shops.
Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
All-sun 25MHz 100MSa / s Das digitale 2in1-Handheld-Oszilloskop ist ein tragbares Messgerät für die Wellenformmessung und erfüllt die grundlegenden Anforderungen der Elektrotechnik.
The Lambda Tester is designed to measure the crossover changes which occur in the closed loop contorl system.
The tester can be used to analyse Zirconia or Titania type sensor.The tester can simulate the sensor signals to the ECU
to verify acceptance of the signals and confirm that the ECU acts upon these signals.
Battery Analyzer,Quickly test the battery's main specifications: IR, CCA, Voltgage.
TurboGauge is a comprehensive gauge for ECU-minded drvier who is looking to improve vehicle’s fuel consumption and save money! By using TurboGauge VI, driver can monitor driving habits and improve Their driving performance up to 20% by carefully monitoring and tracking fuel economy while reducing fuel robbing habits like hard accelerations And higher than normal speed.