Produktbeschreibung
XTOOL D9 Pro is an OE-level professional full diagnostic scanner which provides you with more efficient diagnostic service. With 5.1 Android System, the touchscreen, 2GB RAM + 64GB ROM memory, XTOOL D9 Pro offers 3 years free Update and 5 years warranty.
XTOOL D9 PRO OBD2 Bi-directional Scan For VW/BENZ/BW ECU Online Programmer ECU Coding Active Test Diagnostic Tool 42+ Services
XTOOL D9 Pro is an OE-level professional full diagnostic scanner which provides you with more efficient diagnostic service. With 5.1 Android System, the touchscreen, 2GB RAM + 64GB ROM memory, XTOOL D9 Pro offers 3 years free Update and 5 years warranty.
Product Features:
OE-Level Full System Diagnostics:
XTOOL D9 Pro is an OE-level full diagnostic scanner as it can scan ECUs in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules, providing you with a dealership- level only diagnosis, getting the accurate and in-depth results across all automotive systems.
Smart AutoVin & Auto Scan+BT Connection+Cable Connection:
XTOOL D9 Pro provides you with more efficient diagnosis work. You just need to plug the VCI into the OBD2 port, within a working range of 33 feet(10 m), you can use the D9 Pro to communicate with the vehicle through BT connection, providing you with higher mobility. Use AutoVin to automatically read the vehicle identification number, or access the OBDII menu to use Auto Scan to perform a comprehensive scan of all available modules to shorten the diagnosis time.
Commonly-Used 42+ Services:
XTOOL D9 Pro with car service tool is designed for mechanics and workshop, garages. Along with the standard service functions like Oil Reset, EPB, SAS Adjustment, DPF Regeneration, Throttle Relearn and Injector Coding, IMMO, ABS Bleeding, TPMS Reset, BMS Reset, etc. Note: Service functions does not work on all vehicles.
Bi-Directional Control/Active Tests+ECU Coding + ECU Programmer:
XTOOL D9 Pro is a bi-directional scan tool with ECU codding ,allows you to receive information to and from the vehicle's onboard computer and can send commands to the vehicle ECU to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That's helpful for DIY mechanics, speeding up the troubleshooting process when it's time to make repairs.
High Quality Tablet +Multi-Language :
10000 Mah 3.7V Battery with 8MP Camera can works with our XV100 Endoscope, 10 inch biggr screen with 2GB RAM + 64GBROM Memory space, with Bluetooth and WiFi to keep update online 12+ kinds of languages.
Online Repair Resources:
Provide more than 200000+ vehicle models' service & repair information, handbook, repair case and operation skill
One-Click identify VIN:
Smart AutoVIN technology for fast and precise identifying vehicles in one touch to scan ECUs, acquire vehicle info and run diagnostic on selected systems.Quickly get your car's information,save your time.
One-Click Generate Health Report:
Health Report will scan all vehicle modules and give you a status list for each modules condition. Also known as "Global Test" or "Full Scan" .This diagnostic tool can automatically generate a diagnostic report when diagnostic work is successfully finished.The reports are saved to the internal memory for later review. The reports are able to be saved in PDF format, and as the tablet is equipped with WIFI, these can be emailed to the office or directly to the customer.
Maintenance Help:
Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.
Product Functions:
Support Newest Doip and with CAN FD Functions:
The D9 Pro can works for the Doip protocol and CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)
2021 ADVANCE FUNCTION: SUPPORT EXTENSION MODULES(need to buy additionally)
1.Videoscope (Mainly applied to check unseen parts of engine, fuel tank, braking system, etc.)
2.KC501 (For Benz infrared key programming, for VW 4th, 5th IMMO, for eeprom, for chips programmer)
3.KC100 (For VW 4th and 5th immo )
4.KS01(For Toyota all keys lost programmer )
5.KS02( For Mitsubishi all keys lost programmer)
D9 PRO ECU Programmer
ECU PROGRAMMER For B-enz/B-MW/VW/F-ord/Mazda
D9 Pro supports the Online ECU Programmer for B-enz/B-MW and VW and Offline ECU Programmer for Ford /Mazda
Program new ECUs(PCM, ECM)
ECU CODING – The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.
OIL RESET – Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
SAS RESET – Perform steering angle sensor calibration and clear records;
BATTERY RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
ABS BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the "learned" values stored on ECU are returned to the default state;
TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;
KEY Programmer: Help ECU to recognize the new keys when you need to add new keys.
DPF REG – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
.............
42+ Special Functions:
1.ECU CODING
Because every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. XTOOL D9 Pro is equipped with advanced ECU coding function for addressing the following issues:
After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
By changing the code with the ECU coding, it's easy to improve vehicle performance or stimulate high-end functions for the car.
ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
2.All System Bidirectional Scan Tool -XTOOL D9 Pro (Bigger,Bidirectional,Better )
With this diagnostic tool's Active Test, you can output the command into the ECU in order to turn on/off actuators, to find faults in the subsystems of your car effortlessly, without using the vehicle's control: Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door lock ... (Available test varies by the vehicle manufacturer, year, and model.)
3.Support DoIP protocol
4.Support CAN FD protocol
5.Auto Vin Scan: Smart AutoVIN technology for fast and precise identifying vehicles in one touch to scan ECUs, acquire vehicle info and run diagnostic on selected systems. Quickly get your car's information, save your time.
Package Includes:
1pc x XTOOL D9 Pro tablet
1pc x VCI Box
1pc x For KIA-20 adapter
1pc x For Toyota-17 adapter
1pc x For GM/DAEWOO-12 adapter
1pc x For Honda-3 adapter
1pc x For Suzuki-3 adapter
1pc x For Hyundai/Kia-10 adapter
1pc x For Fiat-3 adapter
1pc x For Nissan-14 adapter
1pc x For Mazda-17 adapter
1pc x For OBD2-16 adapter
1pc x For BMW-20 adapter
1pc x For Benz-38 cable
1pc x For Mitsubishi-12+16 cable
1pc x For Benz-14 cable
1pc x Main cable
1pc x For Universal -3 cable
1pc x For Citroen-2 cable
1pc x For Audi-4 cable
1pc x For Audi-4 clip cable
1pc x Cigarette lighter
1pc x Power adapter
1pc x USB cable
1pc x Type-C cable
1pc x US power cord
1pc x EU power cord
1pc x Manual
About Delivery
EU Warehouse Shipping: 3-5 working days. We have stocked up hot sale items in EU(Czech) Warehouse ,which is more convenient for you. Free TAX, faster shipping with cheaper price.
Yanwen Express: 9-14 working days ,we will prepay the tax,then do not need customers to pay tax for most european counties
( We will send by Yanwen Express by default because of EU high Customs tax. If Customers need the faster DHL shipping method and willing to pay the high tax .Pleasee leave message to us in time after placing the order)
DHL Shipping: 3-5 working days, To help you clearance we will help declare a lower price on the invoice. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.
Note:
1.All of the items will be shipped to PAYPAL Shipping Address,please confirm your address on PAYPAL before you buy.
2.Your order will be usually shipped out the same or next business days once the payment is made, except on weekends and holidays.
Contact information:
Email:
Sales@DiagOBD2.deSkype:
diagtool.deMobile:+86 15223201143
WhatsApp: +86 15223201143Handy Version: Bitte scannen das Bild, koennen Sie per Handy Kaufen!!!